Molybdenum is a disulfide. Molybdenite is a solid black powder with a metallic luster. Chemical formula MoS2, melting point 1185, density 4.80g/cm3 (14), Mohs hardness 1.0~1.5.Particle size 80nm, 1,5 microns, and 5 microns
Purity: 99%

Molybdenum Disulfide MoS2:
Molybdenum diulfide (Moly) is an alloy of molybdenum and sulfur. Molybdenite is a component. Molybdenum disulfide is a powder. It is a black solid powder with metallic luster. The chemical formula for molybdenum sulfide It is called MoS2. Molybdenum disulfide melting point The temperature is 1185degC. Molybdenum disulfide density Mohs hardness is 1.01.5. Mohs Hardness: 1.01.5. At 1370degC the decomposition process begins. It decomposes at 1600degC into molybdenum metallic and sulfur. At 315degC it starts to oxidize in the air. As the temperature rises, the oxidation reactions accelerate. Moly Disulfide Insoluble in concentrated sulfuric and dilute acids, water or diluted acid. It is not soluble in alkalis or organic solvents. However, it is soluble with aqua regia, boiling concentrated sulfuric acids and other acids. At 400, it is slowly oxidized to produce molybdenum Trioxide.
Test the molybdenum reagent with 2MoS2+7O2- 2 MoO3+4SO2. After treating the product with sodium or potassium hydroxide solutions (to convert molybdenum trioxide into molybdate), the titanium iron reagent is then added in dropwise. The method is sensitive enough to detect even trace amounts. The solution will not turn golden yellow if no molybdenum dioxide is generated. This is because molybdenum sulfide reacts with either sodium or potassium hydroxide.
Moly sulfide Can react with chloride when heated to form molybdenum penteachloride
2 MoS2+ 7 Cl2- 2 MoCl5+ 2 S2Cl2
LixMoS2 (interlayer compound), a compound formed by the reaction of molybdenum disulfide with alkyllithium, can be obtained under controlled conditions. LiMoS2 will be formed if the reaction is with butyllithium.
Molybdenum Disulfide is a disulfide with a high sulfur content. This active sulfur can easily cause copper to corrode. In many books and articles on lubricant add-ons, it is mentioned. When parts made of copper alloys and copper need to be greased, it's not impossible to use lubricating molybdenum products. But you can also add copper corrosion inhibitors.

Send an inquiry for the latest news Molybdenum disulfide price You can also contact us if you have any questions. Molybdenum disulfide MoS2 Powder Bulk discounts are available.

Features of Molybdenum Disulfide MoS2:
1. Molybdenum Disulphide Nanoparticles (Nano MoS2) are shiny dark gray particles with very good thermal and chemical stability.
2. It is soluble in aqua regia, concentrated sulfuric acid and water. However, it is insoluble in dilute acids and water.
3. The lubricant adhesion can be formed by a dry film that is highly efficient.

Analysis of Molybdenum Disulfide MoS2:

MoS2	MoO3	Insolubles	Fe	SiO2	H2O	Oil	Acid Value
99%	0.05%	0.26%	0.14%	0.05%	0.08%	0.10%	0.54

What is Molybdenum Disulfide MoS2 Poudre produced?
Natural law
MoS2 may be produced by natural methods, such as the molybdenite concentration purification method. The molybdenite concentrator is subjected to physical and chemical reactions to remove acid-insoluble materials, including SiO2, Fe, and Cu. Ca, Pb and impurities such as copper are refined further to get nano-MoS2. Although the nano-MoS2 obtained by natural means is of a lower purity, it can be purified further. If the temperature of the atmosphere is less than 400 degrees, the most expensive MoS2 should be used. It has a lubricating capability below 1300. Therefore, it is recommended that you use the MoS2 based on cost.
Chemical synthesis
The synthetic method is able to prepare sulfides which are high in purity, have fewer impurities, as well as finer particles. It can also produce sulfides which meet various functional requirements. Synthetic methods have always been used to produce nano sulfides. There are a number of methods to produce nano-MoS2, for example, the thermal decomposition of ammonium, hydrogen sulfide, or sulfur, the high-energy milling, carbon nanotube confinement, hydrothermal method, physical and chemical method combinations, etc.

Molybdenum Diulfide:
It is diamagnetic and can be used to convert semiconductors or photoconductors that have a P-type of N-type conductivity.
Molybdenum isothiocyanate can be synthesized for use as a dehydrogenation catalyst.
Molybdenum diulfide has also been referred to as "the King of Advanced Solid Lubricants".
Molybdenum diulfide is an inorganic powder obtained from molybdenum concentrations that have been chemically purified through a change in the molecular composition.
Molybdenum Disulfide disperses well and is not required to be added. It is added to greases as a colloidal phase and does not replace the original grease.
Molybdenum diulfide also extends the service life of equipment by being suitable for high temperatures, high pressures, viscosity high loads and high viscosity mechanical working conditions.
Molybdenum Disulfide is a good friction material because it reduces friction at low temperatures. It also increases friction at higher temperatures. The friction material is easily volatilized.
Anti-friction: Because the size of disulfide particle formed by supersonic Jet Pulverization reaches 325-2500 Mesh, the particle hardness of 1-1.5 and the friction coefficient of 0.05-0.1 are 0.05-0.1. It can be used as friction materials to benefit from the anti-friction effects;
Molybdenum dioxide is a non-conductive material. Molybdenum, trisulfide or trioxide, as well as silicon carbide can cause increased friction. When the temperature of a friction material increases sharply because of friction, the molybdenum dioxide particles that are shrinking gradually heat up, and then expand. This increases friction in the axial directions.
Antioxidant : Molybdenum Disulfide, obtained from a comprehensive chemical reaction, has a pH of 7-8 (slightly alkaline). It is a coating that protects other materials from oxidation.

Store Molybdenum Disulfide MoS2 in the following conditions:
Molybdenum Disulfide MoS2 Pulp will be affected by dampness, so it is important to store the powder in a dry and cool room. Molybdenum Disulfide should not be exposed to stress.

Packing & Shipping Molybdenum Disulfide MoS2:
The packaging depends on the amount of Molybdenum Disulfide MoS2 POWDER.
Molybdenum Disulfide MoS2 Poudre packing: 100g, 500g, 1kg/bag; 25kg/barrel.
Molybdenum Disulfide MoS2 Pulfide shipping: Could be shipped by air, by sea or by express as quickly as possible after payment receipt.



Technology Co. Ltd., () is an established global chemical material manufacturer and supplier with over 12 years' experience in the production of high-quality nanomaterials. These include boride powders, nitride particles, graphite particles, sulfide particles, 3D-printing powders, etc.
Contact us to send a request for chemical powder. ( brad@ihpa.net )

Molybdenum Diulfide Properties
Alternative Names	molybdenum sulfide, molybdenum disulphide, Moly disulfide, or molysulfide powder.
CAS Number	1317-33-5
Compound Formula	MoS2
Molecular Mass	160.07
Appearance	Black Powder
Melting Point	1185 degC
Boiling Point	N/A
Density	5.06 g/cm3
Solubility In H2O	Insoluble
Storage Temperature	Ambient temperatures
Exact Volume	161.849549
Monoisotopic Mash	161.849549
Molybdenum Disulfide Safety & Security Information
Sign Word	Warning
Hazard Statements	H315-H319-H335
Hazard Codes	Xi
Risk Codes	N/A
Safety Declarations	N/A
RTECS Number	QA4697000
Transport Information	NONH for All Transport Modes
WGK Germany	3

Inquiry us