Trending

News

  • 0
  • 0

The two kinds of cement foaming agents

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



OPEC+ is likely to stick to its plan for a small increase in oil production in May despite a surge in oil prices caused by the Ukraine crisis and calls from consumer countries such as the United States for more supply.

Several oil consumers, including the US, have urged producers to boost output further, for the crude price has hit its highest level since 2008 of more than $139 this month. But major OPEC producers including Saudi Arabia and the United Arab Emirates did not raise their output targets, and other countries like Russia avoided talking about the subject of Ukraine.  

OPEC+ is made up of the Organization of Petroleum Exporting Countries (OPEC) and the oil-producing Allies which is led by Russia. Since August 2021, OPEC+ has been sticking to its plan to increase production by 400,000 b/d per month, which will rise slightly to 432,000 b/d from May 1st.

This increase did not mean OPEC+’s concession to consumer countries demanding more oil, but an outcome of an internal recalculation of reference production levels, raising quotas for Saudi Arabia, Russia, Iraq, the United Arab Emirates, and Kuwait.

The supply and prices of many other products in global market like the cement foaming agents will continue to be influenced by the oil supply shortage.


The introduction of Cement foaming agent:

Cement foaming agent refers to all the surface active substances whose solutions can be produced in large quantities through physical (stirring, compressed air, etc.) or chemical reactions under specific conditions. It is surface active, and the double-electron layer is arranged on the surface of the liquid film to inhale air to form bubbles, which are then composed of a single bubble.

 

1. Plant cement foaming agent 

Plant-based plant fumigants mainly include soaps and saponins teas. They are the main source of refined smoking and oil absorbents. They do not contain pollutants, but smoked synthetic absorbents have more appearance than synthetic absorbents. In addition, the main component of these headphones comes from nerves, so they are classified as snorting nerve receptors.

The plant-based adsorbent uses high-quality natural plant polymer chemical materials as raw materials and is made through delicate and complex reactions. The product is pure and transparent oily fluid. It is not sensitive to hard water, non-toxic, tasteless, and has no sediment. PH neutral, dust-free cement, does not pollute the environment. The headset has no camera, is not easy to change, the appearance is rich in shape, and the foam cement is stable. The application has the advantages of low consumption and low cost. It can be widely used in ground heating decoration projects and roof landscape decoration projects, which can reduce operations on a large scale.

 

2. Polymer cement foaming agent 

The product is a shallow viscous liquid with low content, strong diffusibility, uniform quality, stable quality, adsorption and foam. Because the foam surface formed by the adsorbent has high strength and stability, the foam cement made of the adsorbent has an independent closed state, and the bubbles are not produced with the bubbling, but the foam is produced. Good permeability resistance of cement products. Its powerful foam cement can reach more than 1.5 meters without collapsing.

 

Luoyang TRUNNANO Specializes in the production of foaming agents. We are professionals in lightweight concrete and foam concrete solutions. We can supply concrete foaming agent, superplasticizer, aerogel and foam concrete strength enhancer for lightweight concrete mix, CLC blocks all over the world.

If have any need, please feel free to contact:  sales4@nanotrun.com


At present, international supply chains were shocked, and logistics and transportation efficiency decreases. Geopolitical conflicts further aggravate uncertainties about the European and American economic recovery and the global commodity supply. For this reason, I assume the price of the cement foaming agents would not decrease significantly in the short term.

Inquiry us

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity 3D Printing Alloy CoCrW Powder

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Magnesium Diboride MgB2 Powder CAS 12007-25-9, 99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

Our Latest Products

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electrical, electronics, energy and petrochemical sector…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Antimony sulfide can be used to make matches, fireworks and colored glass. It is used in rubber manufacturing as a military and vulcanizing agent.Particle size: 100mesh Purity: 99.99% Antimony Sulfide Sb2S3: Sulfide can be bismuth or black powder…