15-5 is used widely in 3D-printing thin-walled devices, complex parts, cold and hot spraying, laser coating, and biomedical applications.

About the 3D Printing 15-5 Stainless Steel Powder: Stainless 15-5 metal powder can be used for 3D printing of thin-walled parts and devices, cold and hot spraying, laser cladding and biomedical applications. Stainless Steel PH 15-5 is a martensitic, precipitated stainless steel that has excellent corrosion resistance at temperatures as high as 600degF (316degC), and also good mechanical properties.
This stainless steel is pre-alloyed and fine powder. This steel is known for its good corrosion resistance, and has excellent mechanical properties. This type is used widely in medical, aerospace, engineering and other applications where corrosion resistance and high hardness are needed.
In metal injection molding, precipitation hardening is the most commonly used alloy. Cu tends to evaporate during sintering, which is one of its potential drawbacks. It may be necessary to clean the oven regularly in order to prevent cross-contamination. The current study of 15-5pH has been initiated in part with this aspect in mind.
It is a precipitate hardened martensitic steel, containing 15 chromium & 5% nickel. It is high in strength, hardness and corrosion resistance. Heat treatment at low temperatures can increase the strength. It is stronger and more malleable than 17-4 pH. It welds well. This powder can be used in any thermal condition. If you are interested in purchasing 3D Printing Powder Stainless Steel Powder, 15-5 in large quantities, please send us an inquiry.

Category for Stainless Steel Powder:
Alloy grades & Characteristics
Alloy number Stainless Steel powder
Stainless steel:304,316L,410L,15-5PH,17-4PH,2Cr13;
High-strength steel:A100,300M,30CrMnSiA,40CrMnSiMoVA;
Work die steel:18Ni300,H13,M2,M35,M42,T15,2030,S390
Iron Nickel Alloy Powder: Invar 36
The particle size of Stainless Steel powder is:
0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm

Morphology and morphology of Stainless Steel powder
Spherical or near spherical

Stainless Steel powder is a very attractive material.
Grey

Package of Stainless Steel Powder:
Aluminum bag, Vacuum packing

Use of Stainless Steel Powder
3D printing powder

Other applications of Stainless Steel:
powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.

How are 15-5 Stainless steel powder manufactured?
The 15-5PH stainless is an upgrade of the 17-4PH that was developed in the 1960s. This finer structure was achieved by the remelting procedure. This delicate construction increases the toughness. The material has excellent corrosion resistance and is low-temperature toughening. It can be processed either in the solution annealing stage or in the final heat-treatment state. Heat treatment at different temperatures improves the strength and ductility.
Any conditions are acceptable for processing 15-5PH. The alloy must first be slightly formed under the conditions of averaging. It is then weld using techniques such as protection fusion or resistance method. The material was heated at 1038degC (1900degF), for a half-hour, and then cooled in air. It is then followed by annealing the alloy at 1038degC for 1 hour and cold working.

Application of 3D Printer Powder 15-5 Stainless-Steel Powder ?
15-5PH stainless may be used for heating or resolving treatment conditions in order to obtain various properties. The stainless steel can be treated in many different ways, but the H1150m treatment conditions provide the best life expectancy.
Applications: aerospace parts, components manufacturing, other equipment.
Here are some more applications for stainless steel 15-5:
The marine gas compressor section
Hollow shaft,
Papermill equipment
Engine parts
Aircraft parts
gear
Fittings & fasteners
Nuclear reactor assembly
Aerospace structural components
The valve
The shaft and gear
Oil and Gas Components
Nuclear reactor assembly

Storage Condition for 15-5 Stainless Steel powder:
As dampness will affect the performance of 15-5 powder and its use, it is important to store 15-5 stainless powder in a dry and cool room. Ti2AlC Powder should not be exposed to stress.

Shipping & Packing of 15-5 Stainless Steel Powder
The amount of powder 15-5 stainless is used to determine the type of packaging.
15-5 stainless powder packaging: Vacuum packed, 100g/bag, 500g/bag or 1kg/bag. 25kg/barrel or according to customer's request.
15-5 stainless powder can be shipped by air or sea as soon after payment as possible.

Properties 15-5 Stainless Steel Powder
Alternative Names	15-5 stainless Steel Powder, 15-5 Stainless Steel
CAS Number	N/A
Compound Formula	N/A
Molecular Mass	N/A
Appearance	Grey
Melting Point	N/A
Solubility	N/A
Density	N/A
Purity	N/A
Particle Size	0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm
Bold point	N/A
Specific Heating	N/A
Thermal Conduction	N/A
Thermal Expander	N/A
Young Modulus	N/A
Exact and Mass	N/A
Monoisotopic Mash	N/A
Health & Safety Information on 15-5 Stainless Steel Powder
Safety Advisory	N/A
Hazard Statements	N/A
Flashing point	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Declarations	N/A
RTECS Number	N/A
Transport Information	N/A
WGK Germany	N/A

Inquiry us