Cool 3D printing takes you through different technologies

SLS Nylon Powder PrintingNylon sintering (selective laser sintering) is a project that uses spread powder sticks to tile a thick layer of powder materials, such as 3D printed metal powders, on parts. It is heated below the powder melting temperature instead of a set temperature.
Material: nylons, fibers and nylons


Metal 3D printing using SLM
Metal sintering can be described as a selective laser sintering. It is the process of using a powder stick to spread a layer on a molded part, heating it and keeping the temperature well below a metal powder sintering temperature.
Materials: aluminum alloy, stainless steel die steel, titanium alloy, etc


SLA laser photocuring flow
Under the control of the computer, scan along the liquid surface according to the requirements of the section contour. Under the control of a computer, focus the laser beam on the liquid surface and scan it according to the section contour. This will cure the resin along the scanned area, resulting in a resin sheet with the section contour. The table is then lowered a thin layer to cover the cured resin sheet with a fresh liquid resin to perform a second laser scanning curing. The newly-cured layer is then adhered to the previous layer, and so forth until the whole product is formed.
( Tech Co., Ltd. ) is an experienced 3D metal powders producer with more than 12 years in the chemical products research, development and manufacturing industry. Contact us to send an inquiry if you are interested in high-quality 3D printed metal powders.


Inquiry us

Our Latest Products

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electrical, electronics, energy and petrochemical sector…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Antimony sulfide can be used to make matches, fireworks and colored glass. It is used in rubber manufacturing as a military and vulcanizing agent.Particle size: 100mesh Purity: 99.99% Antimony Sulfide Sb2S3: Sulfide can be bismuth or black powder…

0086-0379-64280201 brad@ihpa.net skype whatsapp