Overview of Silicon Carbide Powder

Silicon carbide (SiC) powder is a high-performance ceramic material composed of silicon and carbon. Known for its exceptional hardness, thermal stability, and wear resistance, SiC powder is widely used in abrasives, cutting tools, refractory materials, and advanced technological applications like semiconductors and electric vehicle components.

Features of Silicon Carbide Powder

Exceptional Hardness: One of the hardest known materials, second only to diamond, making it ideal for abrasive and cutting applications.

Thermal Stability: High resistance to thermal shock and can withstand extreme temperatures, enhancing its utility in refractory and high-temperature environments.

Chemical Inertness: Resistant to most chemicals, including acids and alkalis, ensuring durability in harsh conditions.

Wear Resistance: Excellent wear resistance properties make it suitable for demanding mechanical applications.

Electrical Conductivity: Depending on the purity and doping levels, SiC can exhibit varying degrees of electrical conductivity, useful in electronics.

Specifications of 1625C 1500C High Density Spiral Rod SiC Heating Element Silicon Carbide Rod For Furnace SiC Heater Electric

1625C/ 1500C High-Density Spiral Rod SiC Heating Element

Secret Requirements

This silicon carbide (SiC) heating element is built for high-temperature industrial furnaces. It works accurately at temperatures approximately 1625 ° C in air and 1500 ° C in inert atmospheres. The rod uses a thick, high-purity SiC structure with a spiral warm zone design. This form provides also warmth distribution and lengthy service life.

The component is used sophisticated sintering approaches. This creates a hard, oxidation-resistant body that stands up under repeated thermal biking. Its electric resistance stays stable over time. That suggests regular performance without unexpected power changes.

Physical and Electric Details

– Hot area diameter : 14 mm to 30 mm (personalized dimensions offered).
– Cold end diameter : Normally 2– 4 mm larger than warm area.
– Overall size : Varies from 300 mm to 1800 mm.
– Electric resistivity : 0.1– 0.3 Ω · m at area temperature level.
– Max watt filling : 30– 40 W/cm TWO (depends upon heating system configuration).

Each pole features aluminum or nickel cold ends for simple link. These ends remain amazing throughout procedure and reduce stress on terminal hardware.

Applications

These SiC poles are utilized in ceramic sintering, glass melting, warm treatment, and lab furnaces. They manage both batch and continuous processes. The high-density material stands up to chemical strike from most slags and vapors. It also carries out well in oxidizing, neutral, and somewhat lowering atmospheres.

Installation is basic. Just place the element flat or up and down with correct assistance. Constantly enable room for thermal development. Prevent mechanical shock throughout handling– SiC is solid but fragile.

Routine usage reveals marginal aging. Power input can remain steady for hundreds of hours. Upkeep demands are low. Just examine links and placement during regular shutdowns.

Applications of 1625C 1500C High Density Spiral Rod SiC Heating Element Silicon Carbide Rod For Furnace SiC Heater Electric

High-Performance SiC Heating Elements for Industrial Furnaces

Engineered for Extreme Warmth and Long Service Life

The 1625C and 1500C High Thickness Spiral Rod SiC Heating Element delivers reputable, constant warm popular industrial atmospheres. Made from premium silicon carbide (SiC), this electrical heating unit pole is developed to deal with constant procedure at temperature levels up to 1625 ° C (2957 ° F)or 1500 ° C (2732 ° F), depending upon the version.

These heating elements include a thick, spiral-shaped layout that enhances mechanical toughness and boosts warm circulation. The high-density framework decreases porosity, which aids withstand oxidation and chemical deterioration. Because of this, the rods last longer and carry out far better than conventional SiC heaters in harsh problems.

Suitable for a wide range of thermal procedures, these SiC poles are typically used in ceramic sintering, glass melting, steel warm therapy, and research laboratory heating systems. Their fast response time and secure resistance guarantee accurate temperature control– vital for quality-sensitive applications.

Setup is uncomplicated. The poles fit typical furnace arrangements and attach easily to common power systems. They work well in air environments and do not require protective tubes in many setups, minimizing upkeep costs and downtime.

Since silicon carbide naturally creates a protective oxide layer at high temperatures, these components keep efficiency over numerous heating cycles. Customers report fewer replacements and more regular outcomes contrasted to steel alloy heating systems.

Pick the 1625C or 1500C High Density Spiral Pole when you require a difficult, efficient, and dependable home heating solution. Whether you run small set kilns or massive commercial heating systems, this SiC heater offers the sturdiness and thermal security your process needs.

Company Introduction

Welcome to It-Chuiko, a premier international supplier of high-quality silicon carbide powder and silicon carbide ceramics. Our products are renowned for their exceptional hardness, thermal stability, and wear resistance, making them ideal for abrasives, cutting tools, refractory materials, and advanced semiconductor applications. We serve a diverse range of industries, including automotive, aerospace, and electronics, with a commitment to quality and innovation. With state-of-the-art production facilities and rigorous quality control, we ensure that our customers receive superior products tailored to their specific needs. Partner with us for reliable, high-performance materials that drive your business forward.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of 1625C 1500C High Density Spiral Rod SiC Heating Element Silicon Carbide Rod For Furnace SiC Heater Electric

Frequently Asked Questions About 1625C/1500C High-Density Spiral Rod SiC Heating Elements

What is this SiC heating element used for?

This silicon carbide rod works as a heating element in high-temperature industrial furnaces. It is built for continuous use at up to 1500°C in air and can handle short-term peaks near 1625°C. Common applications include ceramic sintering, glass melting, heat treatment, and laboratory testing.

Why choose a spiral rod design?

The spiral shape increases the surface area of the heating zone. This helps spread heat more evenly and reduces hot spots. It also improves electrical resistance control and extends service life under heavy-duty conditions.

How long does this heating element last?

Lifespan depends on operating temperature, atmosphere, and usage cycles. In clean, oxidizing environments below 1400°C, these elements often last thousands of hours. Avoid rapid heating or cooling, sulfur-rich atmospheres, and mechanical stress to maximize durability.

Can it be used in vacuum or inert gas?

No. These SiC rods need oxygen to form a protective silica layer on the surface. Without it—like in vacuum, hydrogen, or pure nitrogen—the element will degrade quickly. They are designed for air or slightly oxidizing atmospheres only.

How do I install the element safely?

Always turn off power before handling. Mount the rod with proper support hardware to avoid bending or stress. Ensure electrical connections are tight but not over-torqued. Leave room for thermal expansion during heating. Never touch the hot zone with bare hands—oils from skin can cause uneven heating and early failure.