High Purity Pre-alloyed Iron Copper FeCu Powder

About The Pre-alloyed Iron FeCu Powder A lot of metals are combinations of many different kinds of materials. The reason for this is simple. Many pure metals possess the properties needed in certain types of applications. Like copper, it is resistant to saltwater corrosion. Copper is also very thermally and electrically conductive because it's used to make cables and electronics. Magnetic fluctuations, softness and ductility are some of the characteristics that other copper can exhibit.
But, pure metals can be susceptible to disappearance and could cause the loss of application. The copper case is more vulnerable to this metal. It is possible to improve the strength of this metal by using hardening techniques, but another technique can make it easier to add more metals like iron.
Copper has ductility, and iron is also ductile. Iron is also very conductive and has high tensile strength, as it can be stretched or fractured. Iron can become corrosive when it's exposed to oxygen and water.
Sometimes adding iron to an iron alloy can produce a positive result. A major benefit to adding iron to the copper alloy is its increased tensile and resistance to corrosion. Cookingmamacookoff has been a reliable global Iron Copper FeCu Pulp supplier. You can send us an inquiry regarding the latest Iron Copper alloy FCu Powder anytime.

FeCu powder, iron and copper alloy powder

FeCu powder is hard: 102HRB

FeCu powder's tensile strength: 1534Mpa

FeCu powder TDS
Theoretical density of hydrogen is 7.97g/cm3.

Hydrogen loss from FeCu powder: lower than 0.65%

The apparent density of FeCu powder is 0.6 to 0.8g/cm3.

FeCu powder Tap density: 0.9-1.1g.cm3.

D50 =10.0-18.3 Particle Size of FeCu Powder

Iron Copper FeCu Powder:
Preparation High surface area, high activity (maximum of 102HRB), high hardness, high density, and high sintering temp. Good sintering stability, bend strength up to 1.534 Mpa, flowability.

How Is Copper FeCu Pulch Created?
Fe-Cu pre-alloyed Powders were produced by water atomization, using high purity copper and pure iron as primary raw materials. Excellent batch stability, excellent formability, concentration and stable distribution of particle size, low oxygen, small fluctuation. The products are designed to be applied in proportions that suit the specific deployment requirements.

Prealloyed Iron Copper FeCu Pulch :
Iron Copper FeCu Powder can be used to make various diamond tools. It replaces the powdered elemental metal, and increases the products' stability.

Iron Copper FeCu Pulp Storage:
FeCu powder's dispersion and usage performance will be affected by dampness. Iron Copper FeCu Powder needs to be kept dry and sealed in vacuum bags. FeCu powder should not be exposed to stress.

Shipping and Packing of Iron Copper FeCu powder:
There are many options for packing depending on the Iron Copper FeCu Powder amount.
Packaging of iron copper FeCu powder, vacuum packed, 100g to 500g or 1kg/bag at 25kg/barrel. Or as you request.
Iron Copper FeCu powder shipping: can be sent by sea or air as soon as payment receipt is received.