High Purity Hafnium Carbide HfC Powder CAS 12069-85-1, 99.9%

Hafnium Carbide, an inorganic material that has a high melting points is very resistant to wear and corrosion. It also resists oxidation in extreme temperatures (1100-1100°C). Particle size: -325mesh
Purity: 99%

About Hafnium Carbide HfC Powder:
Hafnium carbide HfC This is a combination of carbon and hafnium. Hafnium carbide melting point The melting point of this binary compound is approximately 3900°C. However, it is not resistant to oxidation and can oxidize at temperatures as low or as 430°C.
Hafnium carbide The HfO2 is a hard, black-gray, and brittle material. High cross-section absorbs the thermal neutrons. Resistivity 8.8mohm*cm. Used in nuclear reactor control rods. Preparation involves heating oil soot with H2 under H2 at 1900degC-2300degC. It can be used to form the crucible for melting oxide and other forms of oxide.
The improved spark plasmasintering (SPS), device was used for ultrafine carbonized Ha powder by carbothermal reduction reactions of HfO2 at 1650°C. The powder contains a small particle size (about 125nm) and a low level of oxygen, less than 0.5%. Powder purity is greater than 99.9%, with Zr being the exception. It is 99.6% when powder contains Zr impurities. The low synthesis temperatures, the rapid heating/cooling rates, and the current influence of the improved SPS procedure reduce intermediate reactions. This also minimizes particle growth. New synthesis methods allow for the production of large amounts of HfC (>175 g/day). HfC ceramics of high relative densities (>96%) can be obtained by SPS sintering at 2300C for 30 minutes.

To receive the latest information, send us an inquiry hafnium carbide price Please fill out the form below if you wish to buy Hafnium Carbide Powder In bulk.

Hafnium Carbide HafC Powder Performance:
Hafnium Carbide powder is a gray metallic material. This is because it has the highest melting temperature of any compound. You can use it as an additive to cemented carbide, which has excellent characteristics like a lower and better thermal conductivity. This powder is also used widely in cutting tools, molds and rocket nozzle materials.

Technical Parameters of Hafnium Carbide HfC powder :
Hafnium Carbide powder Chemical Composition (%)
Please send me HfC Total C Free.C
HfC Powder 99min 6.3min 0.1max

It is simple. Is Hafnium Carbide HfC Powder made?
You can prepare hafnium carbonide powder by reacting hafnium oxide and carbon at 1800-2500degC. In this case, it is necessary to wait longer to get rid of all oxygen.
Hafnium carbonide is a dark gray, brittle liquid. This can be made by heating an alloy of elements or by reacting hafnium trioxide with methane at 2150°C. You can obtain sufficient amounts of hafnium tetrachloride or metal sponge in the production of zirconium at large scales for use in nuclear reactors. Industrially, you can make hafnium carbonide from hafnium oxide or metal sponges at between 1500 and 1700C. It contains around 6.30% of the expected amount of carbon and as much as 0.1% free carbon (219) This hafnium-carbidide compound is not true stoichiometric, but it only contains a carbon solution at one interstitial point of the face-centered cubic lattice.
Hydrofluoric acid will dissolve carbonization, but it is inert at room temperatures. At 250-500degC, carbonization is exothermic with halogen to create hafnium Tetrahalide. It also forms hafnium Oxide with oxygen at 500degC. At higher temperatures, the hafnium carbonide will lose some of its carbon due to hydrogen.

Hafnium Carbide Uses:
Hafnium carbonide (HfC), which has the highest melting temperature of any binary alloy, has many high-temperature uses. HfC is a suitable candidate for extreme high temperature applications like rocket nozzles or scramjet components. You can use carbonization in hard coatings. This is often done using processes like plasma spraying. HfC structural can also be used to make high-temperature components and thermal insulation materials.
Hafnium carbonide (HfC), which has a melting point of 3890degC above, can be used as a refractory binary material. HfC or NBC may also be used in reactors as refractory materials. Ta4HfC5 mixed carbide has the highest melting temperature at 4215degC.
1. Hafnium carbide is an additive for cemented caride. This product is widely used in the fields of cutting tools, molds and other related industries.
2. Hafnium carbonide can be used as rocket nozzle material.
3. Hafnium-carbid is used for nuclear reactor control rods. It's an excellent metal to make nuclear reactor controlrods.
4. Used for making ultra-high temperature ceramics
5.Reactant used to synthesize an organometallic hafnium-containing polymer
6.For coating.

Hafnium carbide HfC powder Storage Conditions
Hafnium Carbide HfC Pulp should be kept in a dry, cool, and sealed environment.

Shipping Hafnium Carbide Powder - Packing and Shipping
You can pack it in two plastic bags with the inside.
Hafnium Carbide Powder Packaging: Vacuum packing 100g, 500g and 1kg/bag. 25kg/barrel. Or as you request.
Hafnium Carbide HfC Powder shipping: Could be sent by sea, air, or express once payment receipt is received.


Robocup2009 advanced materials Nano Technology Co. Ltd.
High-quality products are what you want Hafnium carbide powder Please feel free and contact us to make an enquiry. ( brad@ihpa.net )

Hafnium Carbide Properties

Other Titles hafnium(IV) carbide, hafnium monocarbide, HfC powder
12069-85-1
Compound Formula HfC
Molecular Weight 190.5
Appearance Black Powder
Melting Point 3900 degC
Boiling Point N/A
Density 12.20 g/cm3
Solubility of H2O N/A
Exact 191.946549

Hafnium Carbide Safety & Health Information

Binary Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
Transport Information N/A

Inquiry us

NEXT Carbide powder

Our Latest Products

High Purity Chromium Carbide Cr3C2 CAS 12012-35-0, 99%

Chromium carbide dust is an organic material with a high melting temperature and good wear resistance.Particle Size 2 Microns Purity: 99% About Chromium Carbide Cr3C2 Powder: Chromium carbide It is very strong refractory clay material. It'…

High Purity Silicon Dioxide SiO2 powder CAS 7631-86-9, 99.9%

Silicon dioxide is also called silica. It's an oxide of silicon and has the chemical composition SiO2. Silica, which includes silica found in quartz and quartz sand, is collectively called silica.Particle Sizes: 10-30nm Purity: 99.5-99.9% Silicon D…

High Purity Aluminum Silicide AlSi2 Powder, 99%

Aluminum silicide also goes by the name aluminum disilicide. Its chemical formula is AlSi2. AlSi2 is used in powder metallurgy and as brazing solder. Purity: 99%Particle Size: 5-10um Aluminum Silicide AlSi2 Pulver: Alloys of aluminum and silico…

0086-0379-64280201 brad@ihpa.net skype whatsapp