About Metal Alloy Titanium Rod For Making 3D Printing Powder :
Purposes: Aviation and ship parts, medical use
Execution standard:
Titanium And Titanium Alloy Bars For Powder Production In Additive Manufacturing (GB/T38973-2020)
Permissible size deviation:
Allowable deviation of bar diameter is ±0.1mm.
The allowable deviation of bar length is ±5 mm, a small amount of bar length shorter than the nominal length (10~100) mm is allowed, but not more than 5% of the total number.
Both ends of the bar should be cut flat, cutting Angle should not be greater than 4 mm.
The bending degree of the bar should not be greater than 0.7mm /m.
Appearance quality:
The surface of bar should be clean, no oxide scale, crack, folding and other defects are allowed. Local defects on the surface of the bar shall be removed and cleaned. Depth shall not exceed allowable diameter deviation.
The surface of the bar is allowed to be less than half of the allowable diameter deviation of individual slight scratches, indentations, pitting and other defects.
Payment & Transportation:
Metal Alloy Titanium Rod For Making 3D Printing Powder Properties | |
Other Names | Titanium rod |
CAS No. | N/A |
Compound Formula | Ti |
Molecular Weight | N/A |
Appearance | N/A |
Melting Point | N/A |
Solubility in water | N/A |
Density | N/A |
Purity | N/A |
Size | customized |
Boling point | N/A |
Specific Heat | N/A |
Thermal Conductivity | N/A |
Thermal Expansion | N/A |
Young's Modulus | N/A |
Exact Mass | N/A |
Monoisotopic Mass | N/A |
Metal Alloy Titanium Rod For Making 3D Printing Powder Health & Safety Information | |
Safety Warning | N/A |
Hazard Statements | N/A |
Flashing point | N/A |
Hazard Codes | N/A |
Risk Codes | N/A |
Safety Statements | N/A |
RTECS Number | N/A |
Transport Information | N/A |
WGK Germany | N/A |
Inquery us
PREVIOUS Products
NEXT Products
Item No.: Tr-Ni Nickel powder is a kind of gray or gray-black powder, the chemical formula is Ni, with conductivity, insoluble in water, ammonia concentrated nitric acid, soluble in dilute nitric acid, slightly soluble in hydrochloric acid a…
Item No.: Tr-Bi Bismuth has a series of excellent characteristics, such as specific gravity, low melting point, volume expansion and contraction during solidification, etc. Purity>99%Particle size: 80nm…
Item No.: Tr-Cu Copper powder is widely used in powder metallurgy, electric carbon products, electronic materials, metal coatings, chemical catalysts, filters, heat pipes and other electromechanical parts and electronic aviation fields.Purit…