Trending

News

  • 0
  • 0

Thermal insulating refractories

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



The Group of Seven leading economies is discussing imposing a cap on Russian oil prices by imposing restrictions on insurance and shipping, according to people familiar with the matter.  The potential mechanism would only allow shipments of Russian crude oil and petroleum concrete foaming agent are still very uncertain.

Thermal insulation materials refer to materials or material composites that have significant resistance to heat flow. The porosity of thermal insulation refractories is generally more than 45%, the bulk density is not higher than 1.5g/cm3), and the thermal conductivity is low (≤ 1.0w m-1k-1). There are many kinds of thermal insulation materials, which can be classified according to material, temperature, shape and structure.

 

According to its internal organizational structure, it can be divided into three categories:

1.  Porous particles, such as expanded vermiculite and expanded perlite.

 

2. Porous fiber: common are ultra-fine glass wool, asbestos and mineral rock wool and so on. This kind of material has good heat resistance and low thermal conductivity. It is usually a single or several composite fiber cloth or felt made of inorganic fibers, which has the characteristics of low thermal conductivity and good temperature resistance. However, glass wool and mineral wool samples are easy to absorb water and produce fiber dust in the air, which is harmful to human health and seriously hinders their popularization and application. In the 1980s, fiber thermal insulation materials accounted for a large share of the market, because of its excellent thermal insulation and fireproof performance, mainly used in building wall insulation. Because inorganic fiber has many outstanding advantages, such as light weight, low thermal conductivity and high heat capacity, it has been widely used in the thermal protection engineering of all kinds of advanced weapons in recent years. At present, the inorganic fibers that can be mass produced are aluminum silicate fiber, glass fiber, quartz fiber, zirconia fiber, carbon fiber and silicon carbide fiber, etc.

 

3. Foaming materials: including inorganic type, organic type and organic-inorganic mixed type. Common inorganic types include foam glass and cement. In the 1980s, calcium silicate samples were recognized as the best thermal insulation materials in hard bulk materials because of their low bulk density, low thermal conductivity, high fire resistance and excellent mechanical properties. However, in the 1990s, because of the asbestos in the sample, it was gradually replaced by pulp fiber. However, the pulp fiber is not resistant to high temperature, which significantly affects its application at high temperature. There are phenolic foam, polyethylene foam and polyurethane foam, which are widely used in the field of thermal insulation because of their low volume density, low thermal conductivity and water resistance.

 

According to the use temperature, it can be divided into low temperature thermal insulation material and high temperature thermal insulation material.

The temperature range of low temperature thermal insulation materials is 600 to 900 , the temperature range of medium temperature thermal insulation materials is 900 to 1200 , and the temperature of high temperature thermal insulation materials is generally higher than 1200 .

 

According to the volume density, it can be divided into ultra-lightweight and lightweight bricks.

The bulk density of lightweight brick is lower than that of 0.4~1.3g/cm3; the bulk density of ultra-lightweight brick is lower than that of 0.4g/cm3.

 

According to the shape of the product.

One is shaped lightweight refractory bricks, including clay bricks, siliceous, high alumina and some pure oxide lightweight bricks, etc.; the other is amorphous lightweight refractories, such as lightweight refractory concrete.

 

According to the raw materials, it can be divided into alumina, high alumina, silicon and magnesia and other heat insulating refractories. The thermal insulation refractories of different materials have different use temperature and related performance characteristics.

 

According to the material, it can be divided into three types: organic thermal insulation material, inorganic thermal insulation material and metal thermal insulation material.

 

The heat loss on the surface of the furnace body and the heat storage loss of the masonry in the industrial kiln are generally about 24045% of the fuel consumption. When the structural material of the furnace body adopts light bricks with low hot melting and low thermal conductivity, the fuel consumption can be greatly reduced; at the same time, because the kiln can be rapidly heated and cooled, the production efficiency of the equipment can be improved; the weight of the furnace body can be reduced and the structure of the furnace body can be simplified. improve product quality, reduce ambient temperature and improve working conditions.

 

The light refractories have loose structure, large porosity and poor slag resistance, and the molten slag can quickly invade into the pores of the brick body and break it, so it can not be used in the parts that come into direct contact with liquid metal and molten slag; at the same time, because of its poor wear resistance, low mechanical strength and poor thermal stability, it can not be used as a load-bearing structure, nor can it be used in contact with furnace materials and parts that are easy to wear.

 

Because of the above shortcomings of lightweight refractories, lightweight refractories are generally not used in furnace parts in contact with furnace charge, slag and hot air flow with high flow velocity to neutralize parts with large mechanical vibration in industrial kilns. Lightweight refractories are mostly used as thermal insulation layer or insulation layer of kiln. At present, the commonly used lightweight refractory products mainly include zirconia hollow ball, alumina hollow ball, lightweight mullite brick, lightweight high alumina brick, lightweight clay brick and refractory fiber.

 

Concrete Additives Supplier

TRUNNANO is a reliable foaming agents supplier with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality CLC foaming agents, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


The latest poll by CSA for consumer finance company Cofidis shows the French are taking action to trim their budgets as inflation erodes household purchasing power.  

According to Le Figaro, the poll shows that French people think they need to earn an average of 490 euros more a month in order to live a decent life. This is an increase of 23 euros compared to the purchasing power barometer published in September 2021. Amid inflation and international tensions, this average in the polls masks differences among households, with some social groups much more severely affected by the decline in purchasing power than others. Seventy-eight percent of single-parent households, 76 percent of 25-to 34-year-olds, and 72 percent of blue-collar workers said the international situation had had a negative impact on their personal finances, compared with 64 percent of all French people.  

In response to rising prices, soaring energy, and food prices, in particular, the French government is preparing to launch a package of measures designed to increase the purchasing power, such as extending the energy price protection mechanism, the extension of the fuel discount measures, and more targeted alternative measures, will be distributed inflation-linked pension and social security benefits, check the "food" and so on.

Because of the soaring energy prices, the concrete foaming agent price is predicted to rise in the future.

Inquiry us

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity 3D Printing Alloy CoCrW Powder

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity Magnesium Diboride MgB2 Powder CAS 12007-25-9, 99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

Our Latest Products

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have a high wear resistance. They are widely used by the electrical, electronics, energy and petrochemical sector…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Antimony sulfide can be used to make matches, fireworks and colored glass. It is used in rubber manufacturing as a military and vulcanizing agent.Particle size: 100mesh Purity: 99.99% Antimony Sulfide Sb2S3: Sulfide can be bismuth or black powder…