High Purity 3D Printing Inconel Alloy In625 Powder
If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
According to statistics from China Chemical and Physical Power Supply Industry Association, China's export volume and export value of lithium-ion batteries have continued to increase. In 2021, China's exports of lithium-ion batteries were 3.428 billion, with a year-on-year growth of 54.34%. The export of lithium-ion batteries was 28.428 billion DOLLARS, up 78.34% year on year.
From the battery export destination, so far. China's lithium-ion batteries are mainly exported to the Asia Pacific and the United States and other places. In terms of price, the price of Inconel 625 Powder, led by lithium-ion batteries, is expected to expand globally.
About 3D Printing Inconel Alloy In625 Powder:
Inconel 625 is a high-performance nickel-based superalloy known for its high level of strength, high temperature and corrosion resistance. This superalloy consists mainly of nickel (at least 58%), followed by chromium, molybdenum, niobium, iron, tantalum, cobalt, and trace amounts of manganese, silicon, aluminum, and titanium. It can withstand high pressures and a wide range of temperatures. Inconel 625 has a melting point of about 1300°C and a thermal expansion coefficient of 1.28 × 10-5 1/K(at 20°C). It can resist all kinds of extreme temperatures from low to very high.
Inconel625 has a density of 8.4 g/cm3 and a melting point of 1290-1350℃. It has excellent corrosion resistance to inorganic acid and various corrosive media in oxidation and reduction environments. Resistant to carbonation and oxidation in static or circulating environments, and to chlorine-containing gas corrosion
Inconel625 alloys exhibit excellent corrosion resistance in many media. Its excellent resistance to pitting, crevice, intergranular corrosion and erosion in chloride media, as well as its ability to resist corrosion in highly acidic environments, make it a suitable choice for nuclear and marine applications.
625 alloys exhibit excellent corrosion resistance in a wide range of media. Excellent resistance to pitting, crevice corrosion, intergranular corrosion and corrosion in chloride media. It has good corrosion resistance to inorganic acids, such as nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid, etc. At the same time, it also has alkali and organic acid corrosion resistance in oxidation and reduction environments. Effective resistance to chloride ion reduction stress corrosion cracking. It is almost non-corrosive in seawater and industrial gas environments and has high corrosion resistance to seawater and salt solutions, as well as at high temperatures.No sensitivity during welding. Resistant to carbonation and oxidation in static or circulating environments, and to chlorine-containing gas corrosion. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Inconel Alloy In625 Powder in bulk.
Composition for nickel based alloy powder In625 (percentage by mass):
Cr
|
Mo
|
Co
|
Nb
|
Al
|
S
|
Ni
|
20-23
|
8-10
|
1 max
|
3.15-4.15
|
0.4 max
|
0.015 max
|
Bal
|
Ti
|
C
|
Fe
|
Mn
|
Si
|
P
|
Cu
|
0.4 max
|
0.1 max
|
5 max
|
0.5 max
|
0.5 max
|
0.015 max
|
0.07 max
|
category
|
Alloy grades and characteristics
|
Alloy number:
|
Nickel-based alloy IN625 powder
|
Particle size:
|
15-45μm, 15-53μm, 53-120μm, 53-150μm
|
Morphology:
|
Spherical
|
Appearance:
|
Grey
|
Package:
|
Aluminum bag, Vacuum packing
|
Application:
|
3D printing metal powder
|
Other applications:
|
powder metallurgy(PM), injection molding(MIM), spraying coating(SP) etc.
|
How is 3D Printing Inconel Alloy In625 produced?
The production and composition of the Inconel 625 depend on the specifications required for the material.
In order to improve the toughness of the material, heat treatment of the alloy is necessary.In the case of Inconel 625, the following treatments can be used:
High solution annealing: Soak at 1095-1205 ° C (up to 1 hour), then the lower temperature in ambient air or cooling medium. The result is an alloy with superior creep resistance.
Low solubility annealing: This is similar to high solubility annealing but at a lower temperature of 925-1040°C.The alloys produced have good tensile strength and ductility.
Stress relief: This process involves soaking at 900°C for up to 4 hours, followed by cooling in the surrounding air. The final product has excellent integrity in low-temperature environments, as well as optimal strength and stress resistance.
Forging Inconel 625 requires a furnace temperature between 1010 °C and 1150°C. Anything below this range may cause hardness and require reheating of the material.
Applications of 3D Printing Inconel Alloy In625 Powder:
Inconel 625 applications
After softening annealing, low carbon alloy 625 is widely used in the chemical process industry. Its good corrosion resistance and high strength enable it to be used as a thinner structural component.625 alloy can be used in contact with seawater and subjected to high mechanical stress.
Marine application
Due to its high corrosion resistance, especially pitting and cracking resistance, the Inconel 625 is ideal for high-salt, subsea applications. The material is used as propeller blades for ships, mooring lines for fixing ships and similar ships, accessories and fixtures for submarines, and components for marine equipment.
Aerospace equipment
The superalloy has also found its way into the aircraft industry, especially for exhaust equipment, fuel pipes, heat exchanger casings and rocket parts.That's because the Inconel 625 works well even at extreme temperatures and pressures.
Nuclear technology
Inconel 625's strength and corrosion and stress resistance make it a suitable component for nuclear reactors, especially control rods and cores. Nuclear systems also typically involve temperatures in excess of 650°C, which Inconel 625's strength can withstand.
Industrial processes
Because the alloy is easy to manufacture and resistant to high temperatures and corrosion, it is a useful component in the production of manufacturing equipment such as vessels, heat exchangers, valves and fluid distribution systems. Its excellent weldability also makes it a suitable component for pipes used in manufacturing plants.
Storage Condition of Inconel Alloy In625 Powder:
The damp reunion will affect In625 powder dispersion performance and using effects, therefore, Inconel alloy In625 powder should be sealed in vacuum packing and stored in a cool and dry room, the Inconel alloy In625 powder can not be exposure to air. In addition, the Inconel alloy In625 powder should be avoided under stress.
Packing & Shipping of Inconel Alloy In625 Powder:
We have many different kinds of packing which depend on the Inconel alloy In625 powder quantity.
Inconel alloy In625 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Inconel alloy In625 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.
If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com
Inconel Alloy In625 Powder Properties
|
Other Names |
INCO 625 |
CAS No. |
N/A |
Compound Formula |
Ni Cr Fe Mo Nb |
Molecular Weight |
N/A |
Appearance |
Metallic Powder |
Melting Point |
1290-1350 °C |
Solubility in water |
N/A |
Density |
N/A |
Purity |
99% |
Particle Size |
15-45μm, 15-53μm, 53-120μm, 53-150μm |
Boling point |
N/A |
Specific Heat |
N/A |
Thermal Conductivity |
9.8 W/m·°C (21 °C) |
Thermal Expansion |
N/A |
Young's Modulus |
N/A |
Exact Mass |
N/A |
Monoisotopic Mass |
N/A |
|
|
|
|
Inconel Alloy In625 Powder Health & Safety Information
|
Safety Warning |
Danger |
Hazard Statements |
H317-H351-H372 |
Flashing point |
N/A |
Hazard Codes |
Xn |
Risk Codes |
N/A |
Safety Statements |
N/A |
RTECS Number |
N/A |
Transport Information |
NONH for all modes of transport |
WGK Germany |
N/A |
If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com
According to the bank of Spain's latest forecast data, the average inflation is expected to hit 7.6% in 2022, but the average wage increase for workers in this country is expected to be less than 4% in 2022.
If the Bank of Spain's forecast comes true, the gap between price and wage growth in Spain in a single year will be the largest since 1984.
Prices in Spain rose 9.8% year on year in March 2022 and average wages rose 2.4% year on year, with the Bank of Spain forecasting that the country's inflation rate will improve from July.
Recent changes in the international situation have had a big impact on commodity and energy prices. How the prices of the Inconel 625 Powder will develop in the future is still uncertain.
Inquiry us